FlexC® 65 Hydraulic Collet Block (65501H)
$4,047.00 USD / Each
|Spindle capacity (mm)||65mm|
FlexC Collet Blocks are ideal for either horizontal or vertical machining center applications. Their low profile provides maximum tool clearance with the ability to machine taller workpieces. With a maximum working pressure of 2,000 PSI and a draw tube force of 11.3 (42) and 14.1 (65) times the applied pressure, these units provide superior part rigidity with no pushback or rotation during heavy machining. Double-acting, dead-length operation assures maintained height from part-to-part. Units mount from the top with a thru-hole base design. The FlexC collet blocks are the lowest profile models available. Collet blocks accept round smooth, round serrated, hex, square and emergency collets to accept parts of all shapes. FlexC vulcanized collets have a flexible gripping range of ±.020" (.5mm) above and below its nominal size to accept workpiece inconsistency. Collets change out in seconds using the quick-change compression wrench.
Collets and Collet wrench sold separately.
- 2.75" (42mm) or 3.172" (65mm) low profile (69.85 or 80.56mm)
- Dead-length part length control
- Double-acting cylinders– pressure-to-open, pressure-to-close
- Uses 42 or 65mm FlexC vulcanized collets
- Modular units for custom configurations
- Hydraulic operation
WARNING: product can expose you to chemicals, such as lead, including one or more listed chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov